Aqua Services
Vinayak Society, Vadodara, Gujarat
Send E-mail
Send SMS
Home»Our Product Range»

Industrial Gas Containers

In order to cater to the diversified needs of the clients, we offer Gas Containers. The range is manufactured using quality proven material and components that are sourced from renowned vendors. Our products are sturdily constructed and offer remarkable resistance from extreme climatic conditions.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 50,000  / Piece Get Latest Price

Product Details:
Diameter110 mm to 170 mm
Weight7.2 kgs
Temperature90 to 1000 degree
StyleHeadbands
TypeSelf-contained
MaterialPVC
For working in smoke & gaseous contamination of any degree -i or oxygen deficient areas. Our Compressed Air Breathing Apparatus is must for Fire Fighting, Rescue Operation & Industrial Safety. Widely used all over the country by various private and public sector undertakings. Available in 30 minutes and 45 minutes duration cylinders.

    Special Features :

    • Pressure Reduction System of set is as per the latest International standards
    • No assistance required for donning the set
    • The Cylinder can be changed for recharging without any difficulty
    • The brass parts are chromium plated for corrosion resistance
    • Gives audible alarm before the expiry of the time
    • The equipment is supplied in an easy to carry case

    Equipment Manufactured as per IS: 10245 part-II

    Air Supply Cylinder : Seamless, high tensile steel cylinder manufactured to Home Office approved specification.

    Cylinder Valve : Manufactured to BS/IS specification with a high tensile brass body and moulded rubber hand wheel.

    Pressure Reducer : All brass construction utilising simple and well proven piston principle of operation and incorporating overload protection.

    Air Hoses : Both high and low pressure hoses have stainless steel end fittings. Each hose is tested at more than twice its maximum working pressure.

    Demand Valve : The demand valve operates in accordance with the wearer's inhalation and supplies air to the wearer's requirements. Exhalation is achieved through separate valve and when this takes place, the demand valve automatically closes.

    Face Mask : Moulded rubber full face mask as reflex edges for perfect face seal having speech diaphragm & unidirectional exhalation valve quick release buckles for head harness provided.

    Pressure Gauge : The easily readable pressure gauge calibrated in bars/PSI protected by rubber cover is connected to pressure reducer by a flexible high pressure hose line.

    We can also offer you :

    • Gas Mask Respirator
    • Rope Ladder
    • Safety Helmets
    • Wind Sock
    • Glow Signs
    • Artificial Respirator
    • Spark / Flame Arrester
    • Safety Net, Safety Belt
    • Barricading Safety Tape
    • Fire Fighting Equipment
    • Fire Suit

    Cylinder Strap : The carrying cylinder strap of back plate can also accommodate cylinders of all types/sizes without any modification. The infinitely adjustable camlock mechanism provides a simple, very secure, quick and fail-safe operation.

    Back Plate : Made of fibre glass, which is light in weight and has chemical resistance. It is orthopaedically designed in such a manner that weight of the cylinder is put on lower portion giving comfort to the user. For easy handling / transportation, a slot has also been provided on the back plate.

    Alarm Whistle : Attached to high press, j attachment which is positioned close to the ear to avoid confusion as to where whistle is sounding, giving enough time to the user to reach safe place for change over of cylinders.

    Harness Assembly : Made from fine quality nylon webbing is adjustable type with quick release buckles.

    Operation manual and inspection procedure will be furnished with each set.

    Optional Accessories :

    • Air-line connection can be provided
    • Second user provision connection can provided
    Yes! I am Interested
    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 8,000  / Piece(s) Get Latest Price

    Product Details:
    Current2 A, 4 A
    Pole TypeDouble Pole
    Control TypeLow Limit
    Cylinder Capacity50 & 100 kg
    MaterialPVC, VICTOM, Monel, Teflon, Extra duty Borosilicate Glass,
    ApplicationWater & Waste Treatment
    Model no180
    The use of chlorine for sterilizing water is widely practiced throughout the world. vacuum controllers (direct cylinder mounted gas chlorinator) are generally accepted as a very efficient and economical means of rendering water supplies safe to drink and giving protection against water - bone diseases. The technique involves mixing chlorine gas and water to form hypochlorous acid. This kills the harmful bacteria and viruses.

    General Specification

    Aqua -ll instrument represents the latest advance in the design of solution (vacuum) feed gas chlorination.

    Vacuum Chlorinators :

    For safety reasons the system widely in use today for the purification of water supplies in a vacuum solution feed gas chlorinator. A vacuum chlorinator is much safer than a pressure chlorinator as any loss of vacuum causes the gas supply to be shut off instantly and automatically. The principle involves mixing an auxiliary supply of water with chlorine gas. The concentrated solution of chlorine is then injected into the water. Operation in this way, with the aqua-ll, provides a very economic means of purifying water suppliers while maintaining a very high degree of safety and reliability.

    Features :

    Aqua-ll incorporates many technological advanced designed to enhance long term reliability and achieve optimum performance with minimum supervision and maintenance.

    Method Of Operation :

    The chlorine regulator can be mounted either on a wall or on top of the gas cylinder or container. Correct operation depends on obtaining healthy vacuum from the injector. Water flowing through the injector creates a vacuum which opens the inlet valve to admit the gas into the regulator. The injector consists of a vacuum producing venturi and a spring loaded diaphragm check valve. The gas passes through the flow meter and the rate control valve and then to injector where it is thoroughly mixed and dissolved in the water and carried to the application point as a solution. Any vacuum failure automatically shuts off the chlorine gas and ensures that no gas escapes into the atmosphere.

    There is an automatic vent to atmosphere if pressure build up in the regulator. If the source of chlorine gas is exhausted or the gas line plugged and excess vacuum valve in the regulator or the gas supply lines. Aqua-ll gas chlorinator and injector are constructed for PVC, victom, monel, teflon, extra duty borosilicate glass, silver and copper materials.
    Yes! I am Interested
    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 40,000  / Unit Get Latest Price

    Product Details:
    ModelVPVD - 01
    Design Pressure20.771 KG/SQ
    Design TemperatureSuitable For Temp. up to 65 / 10 Degree C.
    Corrosion Allowance1.6 MM [1/6"] Minimum
    Water Capacity769.4 Kgs [Approx.]
    Inspection ByLlyod's Regiser Asia
    Shell Thickness12 MM
    Dished ends Thickness14 MM [Normal]
    Overall Length206012 MM
    Diameter774 MM ID, 798 MM OD
    Tare Weight625 Kgs
    Education Pipe1/2 " NB SCH 80
    We are one of the leading wholesale traders ofChlorine Containers.

    Approval Of Design by Llyod's Register Asia. Chief Controller of Explosive, Govt. of India.
    Yes! I am Interested
    Save time! Get a Best Deal

    *Your information is safe with us.

    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 15,000  / Unit Get Latest Price

    Product Details:
    Gas capacity50 Kg
    Internal volume42 Liters
    Inside diameter356 mm
    Nominal wall6 kgf/cm2
    Test pressure30 Kg
    Tare weight40 Kg
    Working Pressure19. 9 kgf/cm2

    Backed by rich industry experience, we are presenting vast variety of Chlorine Gas Cylinders. These are ideal to be used in various industrial applications such as insecticides, agrochemicals, household cleaning products and more. Our range of these chlorine gas cylinders is provided with stabilizing pressure safety valves and a multi layer insulation system. Clients can avail these cylinders in different sizes and quantities as per their requirements.

    Products Range-

    Model Gas capacity [kgs]Internal volume [lts]Inside diameter [mm]Nominal wall [kgf/cm2]Working presuure [kgf/cm2]Test pressure [kg]Tare weight [kg]
    jmc - 42c5042356619. 93040
    jmc - 84c10084356619. 93065
    jmc - 100c120100356619. 93075
    jmc - 118c142118356619. 93082
    jmc - 55c8055356619. 93036


    Note - with is certificate, chlorine gas cylinder also have cee, nagpur certificate. Chlorine emergency kit (100 kg cylinder)
    Yes! I am Interested
    REQUEST CALLBACK
    Ask Latest Price

    Product Price: Get Latest Price

    Product Details:
    ModelVPVD - 01
    Design Pressure20.771 KG/SQ
    Design TemperatureSuitable for Temp. up to 65 / 10 Degree C.
    Corrosion Allowance1.6 MM [1/6"] Minimum
    Shell Thickness12 MM
    Tare Weight625 Kgs
    We are one of the leading wholesale traders ofChlorine Cylinder.

    Approval Of Design by Llyod's Register Asia. Chief Controller of Explosive, Govt. of India.
    Yes! I am Interested
    X
     

    Download Brochure
    Explore more products
    Gas Chlorinators
    Get Best Quote
    Rad Pumps
    Get Best Quote
    Dosing Pump for RO Plant
    Get Best Quote
    Gas Mask Respirator
    Get Best Quote
    Aqua Services

    Patel (Proprietor)
    No. 9, Vinayak Society, Gotri Road
    Vadodara - 390007
    Gujarat, India
    Send Email
    © Aqua Services. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited